Award Mint, LLC is an authorized vendor of Omega Psi Phi Fraternity, Inc. This coin set was exclusively designed for the members of Omega Psi Phi to the highest standards. The Omega Psi Phi Founders Limited Set consist of 4 2.5" 3D High Quality Brass Medallion Coins in a Purple velvet Case. The case may be used for storage or display. Each coin depicts one of the 4 founders in 3D raised brass. The back of each coin contains the official shield raised in 3D and enamel painted in the fraternity's official colors. The 4 founders are placed on and around raised in 3D brass. Special attention was paid to the fine details of the shield and the likenesses of each founder. Both sides of the coins contain of borders raised brass print in a sea of purple. The borders on both sides containing the fraternity's name, with the front (founder's face side) containing the fraternity's motto "Friendship is Essential to the Soul" and the back with the fraternity's date of founding. Each set is serial numbered making each set unique

• Edges: Diamond Cut Swirled Edges
• Material: Solid Brass
• Size: 2.5 inches in Diameter
• Thickness: .4 cm thick
• Coloring: Enamel Paint and polished brass
• Plating: Old Gold and Nickel
• Numbering: Serial Numbered (Numbers less than 100 are a $100 premium)
• Case/Box: Logo'd Velvet storage/display box

Please Note: This product will not ship until August 5th, 2026. It may also be picked up at the 85th Omega Psi Phi Grand Conclave, Booth #35

Honor legacy, achievement, and brotherhood with this distinguished Omega Psi Phi Escutcheon laser etched K9 crystal award, expertly crafted by Award Mint, LLC. Precision laser engraving captures the fraternity’s iconic escutcheon in striking detail, suspended within premium optical-grade K9 crystal for a sophisticated, timeless presentation.

Designed to reflect the heritage and enduring values of Omega Psi Phi Fraternity, Inc., the escutcheon is permanently etched inside the crystal block, creating a refined three-dimensional appearance that catches light beautifully from every angle. The polished beveled edges and substantial weight of the crystal make it an exceptional piece for recognition ceremonies, chapter awards, milestone anniversaries, line commemorations, and executive presentations.

Like no other, with its elegant rectangular profile, this crystal display of the fraternity's Escutcheon offers a commanding presence whether displayed on a desk, bookshelf, office credenza, or presentation pedestal.

Ideal for honoring service, leadership, scholarship, achievement, and lifelong commitment to the fraternity, this piece blends modern laser craftsmanship with one of Omega’s most revered symbols.

The base or a crystal itself may be laser engraved by a local trophy dealer to further personalize the unit. (This add-on will be added at a future date)

Specifications

• Material: Premium optical K9 crystal
• Design: Internal laser-etched Omega Psi Phi Escutcheon
• Rough Crystal Dimensions: 6.81in x 4.83in x 1.57in
• Total Dimensions: 8.16in x 5in x 1.57in
• USB rechargeable LED Lighting
• Finish: Clear polished crystal with beveled edges
• Display Style: Freestanding rectangular presentation block
• Use: Awards, recognition gifts, chapter honors, commemorative keepsakes

A distinguished keepsake worthy of the fraternity’s proud tradition.

Please Note: This product will not ship until August 5th, 2026 if per-ordered before then. It may also be picked up at the 85th Omega Psi Phi Grand Conclave, Booth #35. Inventory is very limited run. An additional run will be received after that date, TBD.

Shooting the hook hand and arm gesture is an unofficial sign commonly used by the brothers of Omega Psi Phi Fraternity to recognize each other and to signify that they are and their enthusiasm. Award Mint honors this tradition with a professionally made clean and sharp 10” Resin set of bookends Statuette of the hand gesture on a base. The statuette can be suitable for display in an office environment or at home.

Celebrate the brotherhood. This 10-inch statuette captures the hand and arm gesture in striking, lifelike detail. Sculpted with precision and made for display, the piece is a bold yet refined symbol of pride and unity—perfect for your home, office, or chapter house.

Crafted to reflect strength in every curve, crease, and detail of the gesture, this solid, weighty sculpture commands attention while remaining tasteful and professional. Whether placed on a desk, bookshelf, or mantle, it instantly communicates what words can’t—your connection to something greater.

Whether as a personal statement, a gift to a line brother, or an award for achievement, this statuette stands as a lasting tribute to your commitment and legacy. Display it proudly.

Bring the bond of brotherhood to your bookshelf or office with this matching set of hand gesture bookends. One features the left-arm, the other the right—each sculpted in lifelike detail so you can see every crease, knuckle and contour. Standing about 10 inches tall with a solid, weighted base, they’re built to keep your books upright and your fraternity pride on full display.

Crafted from high-quality resin with a metallic finish that catches the light like polished brass, these bookends do more than hold pages in place. They turn your office or home library into a showcase of shared values. Unlike plaques that sit on a wall or certificates that fade in a drawer, these pieces are both functional and symbolic. They make memorable gifts for pledge lines, chapter anniversaries or special awards—and they’ll last long after trends pass.

Display your books—and your commitment—side by side. These bookends aren’t just décor; they’re daily reminders that the legacy you build today will support the brothers of tomorrow.

Please read customizing instructions at end

A recognition piece that goes beyond the shelf — this 2.5-inch solid-brass medallion offers a tactile, lasting way to honor your brothers and chapters. One side features a crisp, high-relief 3-D rendering of the Omega Psi Phi Fraternity, Inc. coat of arms, accented with enamel and polished nickel plating. Along the bottom banner, you can mark a pledge line, chapter name, or region. With diamond-cut swirled edges that catch the light and a solid 0.4 cm thickness, each medallion feels truly substantial in the hand.

What makes these medallions stand out from plaques, trophies, and certificates? They’re built to last. Brass resists wear, enamel maintains its brilliance, and each piece endures long after paper certificates fade or trophies dull. Compact and portable, they’re perfect for personal recognition, presentations, or display cases. Best of all, one side can be laser engraved with text, images, or logos for a small additional charge—or ordered blank for local engraving. Customized laser engraving included.

Please note: Blank medallions are sold only in bulk — lots of 10 medallions.

These medallions aren’t just recognition items; they’re heirlooms in the making. Commemorate a pledge line, anniversary, or special award today, and create tangible links to your chapter’s shared story. Decades from now, they’ll still gleam in your collection, proudly passed from one generation of brothers to the next. Unlike a certificate that hides in a drawer, or a plaque that gathers dust, these medallions will be held, admired, and showcased with pride.

Customization Instructions & Rules                  (Standard Engraving Form)

There are 2 options for customizing your engravable medallion. You may download and complete our standard engraving form and email it to us or you may personalize this medallion using the “Customize It” WYSIWYG editor, uploading your own design or completing the Standard Omega Engraving Form (highly recommended). You use the form only and we will format it for you. Please review the following guidelines carefully before customizing using the WYSIWYG editor or uploading a file and submitting your order:

1. Text & Images

   • You may add black text or monochrome images (solid black only) with a transparent background (.png format).

   • You may also use an offline editor to create a monochrome image containing your text, then upload it and scale it within the engravable area.

   • No color, grayscale, or shaded images are allowed.

2. Placement

   • All custom text and images must remain within the designated engravable area.

   • Do not touch or cross any pre-defined lines, borders, or edges.

3. Sizing & Formatting

   • You may resize text and images to fit the area.

   • The editor allows you to select from various fonts and styles, and you may also create curved text.

4. Final Engraving

   • Your medallion will be laser engraved exactly as shown in the editor once you save and place your order.

   • Please review your design carefully before checkout. Verify spelling, spacing, alignment, and orientation to ensure accuracy.

5. Company Policy

   • We may contact you if we notice an obvious violation of these rules.

   • We are not responsible for mistakes in submitted artwork, including misspellings or misaligned elements.

   • We reserve the right to decline engraving any content that we deem objectionable or that may infringe on licensing or trademark restrictions.

References:

Greek Characters

Award Mint, LLC

Custom Medallion Design & Production Terms and Conditions

Effective Date: April 29,2029

These Terms and Conditions (“Agreement”) govern all custom medallion design and production services provided by Award Mint, LLC (“Award Mint,” “we,” “us,” or “our”). By placing an order, submitting payment, or approving a design, the customer (“Customer” or “you”) agrees to be bound by this Agreement.

1. Scope of Services

Award Mint provides fully custom medallion design and production services, including:

• Custom artwork and layout design
• Conversion of artwork into production-ready grayscale height/depth maps
• Laser engraving, CNC machining, or stamped medallion production
• Optional finishing, plating, engraving, and packaging

All products are made to order and are considered custom goods.

2. Right to Refuse Service

• Award Mint reserves the right, at its sole discretion, to refuse any order, design, or request for any reason.
• This includes, but is not limited to, designs that Award Mint determines to be:
  • Obscene
  • Offensive or inappropriate
  • Derogatory or defamatory
  • Disparaging toward any individual, group, or organization
• Determinations under this section are made solely at the discretion of Award Mint and are not subject to dispute.

3. Design Process & Customer Responsibility

• The Customer is solely responsible for reviewing and verifying all design proofs prior to approval.
• This includes, but is not limited to:
  • Names, dates, spelling, punctuation, and grammar
  • Layout, proportions, spacing, and alignment
  • Image selection and likeness accuracy
• While Award Mint may provide recommendations, final responsibility for accuracy rests entirely with the Customer.

4. Final Approval & No Refund Policy

• Once the Customer provides final approval (written or electronic):
  • The design is deemed fully accurate and accepted in its entirety
  • Production may begin immediately
• Due to the custom nature of the product:
  • No refunds, credits, or cancellations will be issued after final approval for:
    • Spelling or grammatical errors
    • Layout or design issues
    • Missed or overlooked details
    • Dissatisfaction with likeness or artistic interpretation
    • Any other inaccuracies identified after approval

This policy is strictly enforced.

5. Likeness & Rendering Disclaimer

• Award Mint makes every reasonable effort to produce accurate renderings, including facial likenesses.
• However:
  • Renderings are artistic interpretations, not exact replicas
  • Likeness is inherently subjective
  • Final products may vary from digital previews due to:
    • Material properties (e.g., brass finish, plating)
    • Lighting and rendering limitations
    • Machine translation of grayscale depth maps into physical relief

By approving a design, the Customer acknowledges and accepts these limitations.

6. Production Method Acknowledgment

• The Customer understands that:
  • Approved artwork is converted into a grayscale height/depth map
  • This file directly drives the machining or engraving process
• As a result:
  • Minor variations between renderings and finished products are normal and expected
  • Exact visual duplication of digital previews is not guaranteed

7. Changes & Revision Fees

• Before Final Approval:
  Revisions may be allowed at Award Mint’s discretion and may incur additional fees.
• After Final Approval but Before Production Begins:
  • Any change will incur a minimum $100 revision fee
• After Production Begins or Machining is Complete:
  • Changes require a new order at full production cost

8. Pricing & Payment

• Full or partial payment may be required before production begins
• Orders will not be scheduled for production until payment requirements are satisfied
• All prices are subject to change prior to final design approval unless the order, including all applicable revision costs, has been paid in full.
• Once payment is made in full:
  • Pricing is locked for the approved scope only
  • Any additional changes or upgrades will incur additional charges

9. Custom Product Policy (No Returns or Exchanges)

• All medallions are custom-manufactured items
• As such:
  • No returns or exchanges are accepted
• Exceptions apply only in cases of:
  • Verified manufacturing defects
  • Damage during shipping
• In the event of a verified manufacturing defect or shipping damage:
  • The item will be replaced, not refunded, based on the originally approved design and artwork
  • The Customer is required to return the original product as a condition of replacement
• Claims must be submitted within two (2) days of confirmed delivery and must include supporting documentation (e.g., photographs of the product and packaging). Claims submitted after this period may be denied.

10. Intellectual Property & Ownership

• All artwork, renderings, designs, depth maps, and production files created by Award Mint remain the exclusive property of Award Mint, LLC, including:
  • 2D and 3D designs
  • Digital models and relief files
  • Tooling and production methodologies
• The Customer is granted a limited, non-transferable license for personal use of the finished product only.
• The Customer may not, without prior written consent:
  • Reproduce, duplicate, or distribute designs
  • Manufacture the design with another vendor
  • Sell or commercially exploit the artwork
  • Modify or create derivative works

11. Maker’s Mark / Identification

• Award Mint, LLC reserves the right to inscribe or mark its name, logo, and/or website on each medallion produced.
• Such marking:
  • Will be placed discreetly on the bottom edge or a non-visible area of the medallion
  • Will not appear on the primary visible face of the medallion design
• The Customer agrees not to remove, alter, obscure, or replicate such marking without prior written consent.

12. Marketing & Promotional Use

• Award Mint reserves the right to use:
  • Artwork
  • Renderings
  • Photographs of completed medallions
• For marketing, advertising, and portfolio purposes.
• Confidentiality requests must:
  • Be submitted in writing prior to design work
  • Be approved in writing by Award Mint
  • May be subject to additional fees

13. Customer-Provided Content

• The Customer represents and warrants that:
  • They own or have permission to use all submitted materials
  • Such materials do not infringe on any third-party rights
• The Customer agrees to indemnify and hold harmless Award Mint from any claims, damages, or legal actions arising from submitted content.

14. Production & Delivery

• Production timelines are estimates and not guarantees
• Award Mint is not liable for delays caused by:
  • Supply chain disruptions
  • Manufacturing issues
  • Shipping carriers
  • Events beyond reasonable control (force majeure)

15. Limitation of Liability

• Award Mint’s total liability is limited to the amount paid for the order
• Under no circumstances shall Award Mint be liable for:
  • Indirect, incidental, or consequential damages
  • Loss of business, profits, or opportunity
  • Dissatisfaction related to subjective artistic interpretation
  • Any damage, injury, or loss resulting from misuse, improper handling, modification, or unintended use of the product

16. Chargebacks & Payment Disputes

• By placing an order, the Customer agrees not to initiate a chargeback for services rendered in accordance with an approved design.
• In the event of a dispute:
  • The Customer agrees to contact Award Mint first for resolution
• Unauthorized chargebacks may result in:
  • Collection actions
  • Recovery of fees, costs, and damages
  • Enforcement of this Agreement to the fullest extent permitted by law

17. Acceptance of Terms

By placing an order, submitting payment, or approving a design, the Customer:

• Confirms they have read and understood this Agreement
• Agrees to be bound by all terms and conditions

18. Governing Law

This Agreement shall be governed by and construed in accordance with the laws of the State of Florida.

Please note: Blank medallions are sold only in bulk — 10 medallions at a time

A recognition piece that goes beyond the shelf — this 2.5-inch solid-brass medallion offers a tactile, lasting way to honor your brothers and chapters. One side features a crisp, high-relief 3-D rendering of the Omega Psi Phi Fraternity, Inc. coat of arms, accented with enamel and polished nickel plating. Along the bottom banner, you can mark a pledge line, chapter name, or region. With diamond-cut swirled edges that catch the light and a solid 0.4 cm thickness, each medallion feels truly substantial in the hand.

What makes these medallions stand out from plaques, trophies, and certificates? They’re built to last. Brass resists wear, enamel maintains its brilliance, and each piece endures long after paper certificates fade or trophies dull. Compact and portable, they’re perfect for personal recognition, presentations, or display cases. Best of all, one side can be engraved with text, images, or logos. (Award Mint or a local engraver may engrave them for you)

These medallions aren’t just recognition items; they’re heirlooms in the making. Commemorate a pledge line, anniversary, or special award today, and create tangible links to your chapter’s shared story. Decades from now, they’ll still gleam in your collection, proudly passed from one generation of brothers to the next. Unlike a certificate that hides in a drawer, or a plaque that gathers dust, these medallions will be held, admired, and showcased with pride.

This 16″ × 8″ resin wall relief honors the three founders of Phi Beta Sigma Fraternity in striking high relief. You’ll see A. Langston Taylor, Leonard F. Morse and Charles I. Brown rendered with careful detail, all set below the fraternity’s Coat of Arms. The sculpted contours capture their dedication and foresight at the fraternity’s birth.

The warm, wood-tone finish gives the relief the look and feel of carved hardwood without the extra weight or risk of damage. At 16 by 8 inches, it’s the ideal size for a study, office or lodge wall—and its neutral hue works equally well with traditional décor or more modern interiors.

More than a decorative piece, this relief serves as a daily reminder of the principles of brotherhood, service and scholarship that Phi Beta Sigma stands for. Hang it above your desk to spark conversations about the fraternity’s roots or give it as a thoughtful gift for chapter anniversaries, retirements or other milestones. Its understated elegance makes it a standout feature wherever it’s placed.

Built to last and ready to display, this tribute brings history and heritage into your space. Celebrate the enduring spirit of Phi Beta Sigma with a wall relief that’s as meaningful today as the ideals it represents.

Please read customizing instructions at end

A recognition piece that goes beyond the shelf — this 2.5-inch solid-brass medallion offers a tactile, lasting way to honor your brothers and chapters. One side features a crisp, high-relief 3-D rendering of the Phi Beta Sigma Fraternity, Inc. coat of arms, accented with enamel and polished nickel plating. Along the bottom banner, you can mark a pledge line, chapter name, or region. With diamond-cut swirled edges that catch the light and a solid 0.4 cm thickness, each medallion feels truly substantial in the hand.

What makes these medallions stand out from plaques, trophies, and certificates? They’re built to last. Brass resists wear, enamel maintains its brilliance, and each piece endures long after paper certificates fade or trophies dull. Compact and portable, they’re perfect for personal recognition, presentations, or display cases. Best of all, one side can be laser engraved with text, images, or logos for a small additional charge—or ordered blank for local engraving. Customized laser engraving included.

Please note: Blank medallions are sold only in bulk — 10 medallions for $200.

These medallions aren’t just recognition items; they’re heirlooms in the making. Commemorate a pledge line, anniversary, or special award today, and create tangible links to your chapter’s shared story. Decades from now, they’ll still gleam in your collection, proudly passed from one generation of brothers to the next. Unlike a certificate that hides in a drawer, or a plaque that gathers dust, these medallions will be held, admired, and showcased with pride.

Customization Instructions & Rules

You may personalize this medallion using the “Customize It” WYSIWYG editor or by completing and emailing the PBS Engraving Form (Highly Suggested) with your oroder. Please review the following guidelines carefully before submitting your order:

1. Text & Images

   • You may add black text or monochrome images (solid black only) with a transparent background (.png format).

   • You may also use an offline editor to create a monochrome image containing your text, then upload it and scale it within the engravable area.

   • No color, grayscale, or shaded images are allowed.

2. Placement

   • All custom text and images must remain within the designated engravable area.

   • Do not touch or cross any pre-defined lines, borders, or edges.

3. Sizing & Formatting

   • You may resize text and images to fit the area.

   • The editor allows you to select from various fonts and styles, and you may also create curved text.

4. Final Engraving

   • Your medallion will be laser engraved exactly as shown in the editor once you save and place your order.

   • Please review your design carefully before checkout. Verify spelling, spacing, alignment, and orientation to ensure accuracy.

5. Company Policy

   • We may contact you if we notice an obvious violation of these rules.

   • We are not responsible for mistakes in submitted artwork, including misspellings or misaligned elements.

   • We reserve the right to decline engraving any content that we deem objectionable or that may infringe on licensing or trademark restrictions.

Award Mint, LLC

Custom Medallion Design & Production Terms and Conditions

Effective Date: April 29, 2026

These Terms and Conditions (“Agreement”) govern all custom medallion design and production services provided by Award Mint, LLC (“Award Mint,” “we,” “us,” or “our”). By placing an order, submitting payment, or approving a design, the customer (“Customer” or “you”) agrees to be bound by this Agreement.

1. Scope of Services

Award Mint provides fully custom medallion design and production services, including:

• Custom artwork and layout design
• Conversion of artwork into production-ready grayscale height/depth maps
• Laser engraving, CNC machining, or stamped medallion production
• Optional finishing, plating, engraving, and packaging

All products are made to order and are considered custom goods.

2. Right to Refuse Service

• Award Mint reserves the right, at its sole discretion, to refuse any order, design, or request for any reason.
• This includes, but is not limited to, designs that Award Mint determines to be:
  • Obscene
  • Offensive or inappropriate
  • Derogatory or defamatory
  • Disparaging toward any individual, group, or organization
• Determinations under this section are made solely at the discretion of Award Mint and are not subject to dispute.

3. Design Process & Customer Responsibility

• The Customer is solely responsible for reviewing and verifying all design proofs prior to approval.
• This includes, but is not limited to:
  • Names, dates, spelling, punctuation, and grammar
  • Layout, proportions, spacing, and alignment
  • Image selection and likeness accuracy
• While Award Mint may provide recommendations, final responsibility for accuracy rests entirely with the Customer.

4. Final Approval & No Refund Policy

• Once the Customer provides final approval (written or electronic):
  • The design is deemed fully accurate and accepted in its entirety
  • Production may begin immediately
• Due to the custom nature of the product:
  • No refunds, credits, or cancellations will be issued after final approval for:
    • Spelling or grammatical errors
    • Layout or design issues
    • Missed or overlooked details
    • Dissatisfaction with likeness or artistic interpretation
    • Any other inaccuracies identified after approval

This policy is strictly enforced.

5. Likeness & Rendering Disclaimer

• Award Mint makes every reasonable effort to produce accurate renderings, including facial likenesses.
• However:
  • Renderings are artistic interpretations, not exact replicas
  • Likeness is inherently subjective
  • Final products may vary from digital previews due to:
    • Material properties (e.g., brass finish, plating)
    • Lighting and rendering limitations
    • Machine translation of grayscale depth maps into physical relief

By approving a design, the Customer acknowledges and accepts these limitations.

6. Production Method Acknowledgment

• The Customer understands that:
  • Approved artwork is converted into a grayscale height/depth map
  • This file directly drives the machining or engraving process
• As a result:
  • Minor variations between renderings and finished products are normal and expected
  • Exact visual duplication of digital previews is not guaranteed

7. Changes & Revision Fees

• Before Final Approval:
  Revisions may be allowed at Award Mint’s discretion and may incur additional fees.
• After Final Approval but Before Production Begins:
  • Any change will incur a minimum $100 revision fee
• After Production Begins or Machining is Complete:
  • Changes require a new order at full production cost

8. Pricing & Payment

• Full or partial payment may be required before production begins
• Orders will not be scheduled for production until payment requirements are satisfied
• All prices are subject to change prior to final design approval unless the order, including all applicable revision costs, has been paid in full.
• Once payment is made in full:
  • Pricing is locked for the approved scope only
  • Any additional changes or upgrades will incur additional charges

9. Custom Product Policy (No Returns or Exchanges)

• All medallions are custom-manufactured items
• As such:
  • No returns or exchanges are accepted
• Exceptions apply only in cases of:
  • Verified manufacturing defects
  • Damage during shipping
• In the event of a verified manufacturing defect or shipping damage:
  • The item will be replaced, not refunded, based on the originally approved design and artwork
  • The Customer is required to return the original product as a condition of replacement
• Claims must be submitted within two (2) days of confirmed delivery and must include supporting documentation (e.g., photographs of the product and packaging). Claims submitted after this period may be denied.

10. Intellectual Property & Ownership

• All artwork, renderings, designs, depth maps, and production files created by Award Mint remain the exclusive property of Award Mint, LLC, including:
  • 2D and 3D designs
  • Digital models and relief files
  • Tooling and production methodologies
• The Customer is granted a limited, non-transferable license for personal use of the finished product only.
• The Customer may not, without prior written consent:
  • Reproduce, duplicate, or distribute designs
  • Manufacture the design with another vendor
  • Sell or commercially exploit the artwork
  • Modify or create derivative works

11. Maker’s Mark / Identification

• Award Mint, LLC reserves the right to inscribe or mark its name, logo, and/or website on each medallion produced.
• Such marking:
  • Will be placed discreetly on the bottom edge or a non-visible area of the medallion
  • Will not appear on the primary visible face of the medallion design
• The Customer agrees not to remove, alter, obscure, or replicate such marking without prior written consent.

12. Marketing & Promotional Use

• Award Mint reserves the right to use:
  • Artwork
  • Renderings
  • Photographs of completed medallions
• For marketing, advertising, and portfolio purposes.
• Confidentiality requests must:
  • Be submitted in writing prior to design work
  • Be approved in writing by Award Mint
  • May be subject to additional fees

13. Customer-Provided Content

• The Customer represents and warrants that:
  • They own or have permission to use all submitted materials
  • Such materials do not infringe on any third-party rights
• The Customer agrees to indemnify and hold harmless Award Mint from any claims, damages, or legal actions arising from submitted content.

14. Production & Delivery

• Production timelines are estimates and not guarantees
• Award Mint is not liable for delays caused by:
  • Supply chain disruptions
  • Manufacturing issues
  • Shipping carriers
  • Events beyond reasonable control (force majeure)

15. Limitation of Liability

• Award Mint’s total liability is limited to the amount paid for the order
• Under no circumstances shall Award Mint be liable for:
  • Indirect, incidental, or consequential damages
  • Loss of business, profits, or opportunity
  • Dissatisfaction related to subjective artistic interpretation
  • Any damage, injury, or loss resulting from misuse, improper handling, modification, or unintended use of the product

16. Chargebacks & Payment Disputes

• By placing an order, the Customer agrees not to initiate a chargeback for services rendered in accordance with an approved design.
• In the event of a dispute:
  • The Customer agrees to contact Award Mint first for resolution
• Unauthorized chargebacks may result in:
  • Collection actions
  • Recovery of fees, costs, and damages
  • Enforcement of this Agreement to the fullest extent permitted by law

17. Acceptance of Terms

By placing an order, submitting payment, or approving a design, the Customer:

• Confirms they have read and understood this Agreement
• Agrees to be bound by all terms and conditions

18. Governing Law

This Agreement shall be governed by and construed in accordance with the laws of the State of Florida.

Please note: Blank medallions are sold only in bulk — 10 medallions at a time

A recognition piece that goes beyond the shelf — this 2.5-inch solid-brass medallion offers a tactile, lasting way to honor your brothers and chapters. One side features a crisp, high-relief 3-D rendering of the Phi Beta Sigma Fraternity, Inc. coat of arms, accented with enamel and polished nickel plating. Along the bottom banner, you can mark a pledge line, chapter name, or region. With diamond-cut swirled edges that catch the light and a solid 0.4 cm thickness, each medallion feels truly substantial in the hand.

What makes these medallions stand out from plaques, trophies, and certificates? They’re built to last. Brass resists wear, enamel maintains its brilliance, and each piece endures long after paper certificates fade or trophies dull. Compact and portable, they’re perfect for personal recognition, presentations, or display cases. Best of all, one side can be engraved with text, images, or logos. (Award Mint or a local engraver may engrave them for you)

These medallions aren’t just recognition items; they’re heirlooms in the making. Commemorate a pledge line, anniversary, or special award today, and create tangible links to your chapter’s shared story. Decades from now, they’ll still gleam in your collection, proudly passed from one generation of brothers to the next. Unlike a certificate that hides in a drawer, or a plaque that gathers dust, these medallions will be held, admired, and showcased with pride.